• 20May

    With the progress of the times, people do not have the same understanding of home. But advocating “nature” are people’s desire and pursuit of home, leading to people’s higher requirements for home decoration , more attention to environmental protection and health. Bathtub faucets are more and more widely used, and gradually become a trend.

    Structural Principle of Bathtub Faucets

    1.The spool is the hub of the faucet, determining the quality and service life of the faucet. The general spool mainly includes ceramic spool, ball spool, stainless steel spool, etc., of which the best is ceramic.

    Modern Side Spray Three Hole Waterfall Bathtub Shower Faucet

    2.The main structure of the bathtub faucet is the pipe body, and the main material is bronze and brass-based material. Of course, Some more high-end faucets are mainly made of more high-grade material.

    3. The internal structure of the bathtub faucet mainly contains gooseneck, tube, seal, under the box and the connection of the central tube composition;The hot and cold faucet spool has cold, hot two holes, and the seals to ensure the sealing performance. The spool mainly controls the two holes open and close the state, controling its main work by its ceramic pieces.

    Bath faucet according to the structure can be divided into single, double and triple taps. In addition, there are single handle and double handle faucets. Single-type can be connected to the cold water pipe or hot water pipe; double-type can also be hot and cold two pipes at the same time ,mainly used in the bathroom basin and a hot water supplying kitchen basin faucet; triple in addition to hot and cold water Pipe, but also can take the shower nozzle, mainly for the bathtub faucet. General bathtub faucet let the water into the main body through S displacement, but firstly have to enter the spool, then flow into the main body. The water enters the hole on the left side of the commutator in the main body, and achieves the opening and closing action of the water flow by the lifting position of the commutator. The principle of commutator inside the faucet is that the commutator achieves switching function of the bubbler and shower channel through the collocation of the ring and the main body . We should notice that the centerline of the commutator have to be symmetrical,if not, hen there will be the situation of leakage .

    For more information, please refer to the faucets knowledge. Welcome to share this article, please retain the source in the reprint!

    Permalink Filed under: Product Information
    Comments Off

Comments are closed.