• 18Jun

    Because of its water-saving performance, electric faucet and constant temperature quickly reach the performance loved by the people, the use of quality electric faucet part stems from its own materials and excellent production process, while on the other hand is derived from the quality of the installation of electric faucet , electric faucet installation procedures and processes directly determine the quality of its installation. Specific installation process and steps are as follows:

    1, Install the filter:

    Electric faucet must be installed at the water inlet filter, because a small amount of debris in the water, so as not to get stuck floating magnetic electric faucet or clogged shower faucet. If the filter is clogged, it will reduce the flow rate, the water becomes small, floating magnetic inactivity electric faucet can not be heated. After a period of time to remove the filter for cleaning electric faucet, can be used.


    White Copper Electric Faucet USD $96.99, save 69% off

    2. Check the float magnetic position:

    The installer when installing electric faucet must remember to check the magnetic float is in the lower end, it is in the state of freedom of movement, in order to ensure the normal use of electric faucet. Because the floating magnetic hydroelectric interlocking switch, open the valve automatic heating, water heating is stopped off, if floating debris stuck magnetic, electric faucet will be dry or without heating phenomenon, cleared away the debris floating on the magnetic order working properly.

    3, Do not use mixing valve:

    Do not use electric faucet mixing valve, because the use of a mixing valve if it will hit the middle of the hot and cold water while mixing flow, then water flow will be smaller, resulting in electric faucet water temperature is too high, excessive temperature, Variable hot and cold water phenomenon occurs. Staff should be told to use a mixing valve client directly boot to the hot side, without mixing in cold water, this product will make life longer and difficult to scale.

    4, Control water flow:

    Electric faucet manufacturers must use when equipped with special showers, electric faucet under normal operating conditions, to regulate water flow or temperature plus high-end digital upgrade. The average user does not control the habit faucet flow, causing the water temperature can not reach the intended effect.

    In short, the requirements of installation for electric faucet is professional, it is best to seek professional recommendation, the company for such product purchases, because most large enterprises will be equipped with professional installation team on-site installation services and installation of quality than the average master more professional, I suggest that the owners still do not covet a moment of cheap bars.

    If you want to know more about us, please visit Faucet News!

Leave a Reply